spec no: dsac0586 rev no: v.5 date: mar/15/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang package dimension s kphk - 1608pbc blue attention observe precautions for handling electrostatic discharge sensitive device s description the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features 1.6mmx0.8mm smt led, 0.7mm thickness. low power consumption. wide viewing angle. ideal for back light and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant.
spec no: dsac0586 rev no: v.5 date: mar/15/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kphk - 1608pbc blue (ingan) water clear 36 70 90 symbol parameter device typ. max. test conditions units peak peak wavelength blue 468 nm i f =20ma d dominant wavelength blue 470 nm i f =20ma ? 1/2 spectral line half - width blue 25 nm i f =20ma c capacitance blue 65 pf v f =0v;f=1mhz v f forward voltage blue 3.65 4.2 v i f =20ma i r reverse current blue 10 ua v r = 5v parameter blue units power dissipation 102 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsac0586 rev no: v.5 date: mar/15/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang blue kphk - 1608pbc
spec no: dsac0586 rev no: v.5 date: mar/15/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm ) recommended soldering pattern (units : mm ) kphk - 1608pbc
|
